General Information
The following information provides general equipment and service information that will help you to use this manual to properly repair and maintain the bike.
OrientationThe equipment orientation (front, right, left, back) used in manual is referenced to a user sitting on the equipment facing the handlebars.
Tools
Recommended set of service and repair tools:
|
|
|
|
|
|
| Note: (1) Required for pedal removal. | |
>Specification Summary
This table provides a summary of system component specifications.
| System Component | Specification |
|---|---|
| Pedal Torque | 33 ft-lb (45 N•m) |
| Belt Drive Tension | 140 - 150 lbs |
| Chain Drive Tension | 1/2 in (1.3 cm) up/dwn travel |
| Stabilizer fastener Torque | 15.6 ft-lbs (21 N•m) |
| Axle Nut Torque | 29.5 ft-lbs (40 Nm) |
Parts
|
IMPORTANT: Always purchase OEM replacement parts and hardware from Precor. If you use parts not approved by Precor, you could void the Precor Limited Warranty. Use of parts not approved by Precor may cause injury. |
Major Assembly and Parts Location
Exploded View Diagram and Parts List
There is a copy of the parts Exploded View Diagram and Parts Identification List included in the Parts chapter that you can use as a quick reference. It is recommended that you go to the servicer partners 
Precor Connect website to view the most current parts information including the Exploded View Diagram and Parts Identification List.
>Lubricants
Common metal parts Use only NLGI class 2 PTFE (Teflon) synthetic type grease (recommend Mobil 1® synthetic grease or Super Lube® with Teflon grease, or equivalent). Use of unapproved lubricants, cleaners, or solvents may void the product warranty.
Chain Lubricant: Use a high quality petroleum based chain lubricant such as Tri-Flow Superior Lubricant or equivalent.
Only use the following approved cleaning products to safely clean and prevent damage to the machine surfaces.
Approved Cleaning Products:
- General Equipment Surfaces:
- 1 part mild soap to 30 parts water (recommend Simple Green® cleaner or equivalent).
- Athletic equipment cleaner, 9x7 pre-saturated wipes (ATHLETIX PRODUCTS).
- Enivir O Safe oxygen enhanced cleaner or Enviro Safe glass and multitask cleaner concentrate.
- Consoles and PVSPersonal Viewing System display.: a diluted solution of one part 91% Isopropyl alcohol to one part water.
Cleaning Procedure
- Wipe down equipment using a soft lint-free cloth using only the recommended cleaning solution. Always spray cleaning solution directly onto the cleaning cloth and not directly onto the equipment surface to avoid equipment damage due to excessive moisture.
|
|
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment surfaces. |
- Rinse surfaces using a clean lint-free cloth dampened with water only.
- Then completely dry with another clean lint-free cloth.